A-A-1462C
B. Construction: The labels shall be furnished as specified in the contract or order, completely coated on one side with a uniform film of pressure-sensitive adhesive. The labels shall be mounted on a release liner or backing sheet.
C. Identification stripe: Identification stripes shall be orange, green, yellow, goldenrod, silver, gold, dark red or light blue as specified.
D. Release liner: The release liner or backing sheet shall be coated with a release coating sufficient to allow manual peel off of the label, but will prevent peel off or separation of the label from the liner/sheet, when the carrier sheet with label is passed over the outside of a convex surface, having an outside diameter of one inch.
E. Pressure-sensitive adhesive: The pressure-sensitive adhesive shall require no heat, moisture, or other preparation prior to application. Labels shall tack quickly to paper, wood, plastic, glass, and fiberboard, and shall adhere without wrinkling, curling, or lifting, at any edge. The pressure-sensitive adhesive shall display a minimum adhesion of 66N/100mm width (60 oz./in. ) when tested in accordance with paragraph 3B.
F. Dimensions: The labels shall be the dimensions specified in the contract or ordering document.
G. Form: The labels shall be furnished in the style, type and form specified in the contract or ordering document. The purchaser shall specify if perforations are required and the location.
H. Tolerances: A tolerance of +/- 0.794 mm (+/- 1/32 inch) shall be permitted for dimensions over one inch, and +/- 0.397 mm (+/- 1/64 inch) form dimensions under one inch for all label dimensions. A tolerance of +/- 1.588 mm (+/- 1/16 inch) shall be permitted for the identification stripe or border width on any one label..
Workmanship: the labels and backing sheet shall be clean, free from lint, dust, spots, scorches, folds, wrinkles, holes, and any other defects which may affect the serviceability, durability, or appearance. There shall be no breaks in fan-folded packs and no labels shall be missing from the backing sheets.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business