A-A-2958
6. Performance Test: Unless otherwise specified, the tests shall be conducted in accordance with table 1. below in an atmosphere of 23o + 2o C (73.4 + 3.6oF) and at a relative humidity of 50% + 5%.
TABLE I.
|
Tests: |
|
|
Dimensional Stability |
1.0% maximum shrinkage after 15 min at 150 C |
|
Haze |
7% max. as per ASTM D 1003 |
|
Static Coefficient of Friction: |
0.31 + 0.11 as per ASTM D 1894 |
|
Surface Smoothness (Bekk Method) |
1500 sec. max. per as TAPPI T 479 |
|
Surface Resistivity (log 10) |
10.3 to 12.7 at 500 volts as per ASTM D 4949 |
|
Dimensions: |
|
|
Thickness |
As per ASTM D 374 |
|
Length: |
279.4 mm (11 inches) + 1.6 mm (1/16 inch) |
|
Width |
215.9 mm (8-1/2 inches) + 1.6 mm (1/16 inch) |
|
Squareness |
+ 1.6 mm (1/16 inch) along the long side |
|
Width of Sensor Strip: |
14.9 mm (9/16 inch) + 1.6 mm (1/16 inch) |
7. Packaging: Preservation, packing and marking shall be as specified in the contract or order.
8. Notes.
8.1 Applicable Documents. Issues of the following documents, in effect on the date of invitation for bids or request for proposal form a part of this document to the extent specified herein.
8.1.1 Federal Acquisition Regulation (FAR) may be obtained from the Superintendent of Documents, Government Printing Office, Washington, DC 20402.
8.1.2 Application for copies of (ANSI) Z1.1, Z1.2, and Z1.3 and (ASQC) B.1, B.2 and B.3 may be obtained from the American Society for Quality Control, PO Box 3005, 611 E. Wisconsin Avenue, Milwaukee, WI 53201-4606.
8.1.3 Federal Standards and Specifications may be obtained from the General Services Administration Specifications Section (3FBO-W) in Suite 8100 at 490 L’ Enfant Plaza, SW Washington DC 20407.
8.1.4 American Standards for Testing Methods may be obtained at 1916 Race Street, Philadelphia, PA 19103.
8.1.5 Technical Association of the Pulp and Paper Industry (TAPPI) may be obtained from TAPPI, Technology Park/Atlanta, PO Box 105113, Atlanta, Georgia, 30348.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business