A-A-1446F
F. Windows. Windows, when specified in the ordering data, shall have rounded or slightly rounded corners, shall be the size and location specified and shall comply with all applicable U.S. Postal Service regulations. The window shall be covered on the inside with a transparent polystyrene window material glued securely on all edges so as not to interfere with insertion or contents. The transparent polystyrene window material shall be free of conditions which would prevent the address from being distinctly legible.
G. Printing. Printing shall be as specified (see 6.A) and shall comply with all applicable U.S. Postal Service and GSA Information Resources Service regulations. The envelopes shall accept printing, ink writing and bar coding without feathering, blurring, smearing, or penetrating to the reverse side.
H. Physical properties. Envelopes of styles A and B shall meet the requirements of Table 1. Envelopes of styles C and D shall meet the requirements of Table 2. Natural kraft envelopes shall be made -from commercial envelope grade natural kraft with surface sizing.
I. Size. Size shall be as specified in the ordering data, and shall be outside dimensions.
J. Tolerance. A tolerance of t 3.2 mm (f 1/8 inches) shall be allowed on the dimensions of high cut diagonal envelopes; a tolerance of * 1.5 mm (* 1/16 inch) shall be allowed on the dimensions of all other envelopes. The tolerance on the placement of the window is t 3.2 mm (* 1/8 inch). The dimensional tolerance on the window itself is * 1.2 mm (+ 3/64 inch).
K. Styles A and B requirements.
Style A -Bleached Kraft, white or light brown (as specified in the ordering data) 95% sulfate pulp; unbleached, and/or groundwood not to exceed 5%.
Style B -Natural kraft, 95% sulfate pulp, groundwood not to exceed 5%.
Required basis weight below shall be as specified in contract/order.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business