A-A-1611A
3. QUALITY ASSURANCE:
Responsibility for Inspection. Unless otherwise specified in the contract or purchase order, the supplier is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified, the supplier may utilize his own facilities or any commercial laboratory acceptable to the Government.
The contractor shall certify and maintain substantiating evidence that the product offered meets the salient characteristics of this commercial item description, and that the product conforms to the producer’s own drawings, specifications, and quality assurance practices. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.
Each lot of Cards, Index shall be inspected for conformance to the requirements herein. Sampling for Inspection shall be in accordance with MIL-STD-105 using the plans specified below.
1. Visual and dimensional characteristics- Inspection level I with an Acceptable quality level (AQL) of 4.0 percent defective. The sample unit shall be one index card.
2. Test- Sampling shall be in accordance with plan II of TAPPI T400, for the required tests.
4. PREPARATION FOR DELIVERY:
Packaging, packing and marking shall be as specified in the contract or order.
5. REFERENCED DOCUMENTS:
The issue of each document in effect on the date of the solicitation shall be used to determine compliance with these requirements.
TAPPI test methods are available from:
Technical Association of the Pulp and Paper Industry
Technology Park/Atlanta, P.O. Box 105113
(404) 446-1400
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business