A-A-1631A
B. Dimensional characteristics- For dimensional characteristics, Inspection Level S-2 with Acceptable Quality Level (AQL) of 4.0 percent defective. The sample unit shall be five labels.
C. Sampling for end item testing- Inspection level S-1 with an Acceptable Quality Level (AQL) of 4.0 percent defective. The sample unit shall be five labels selected random from the issue unit. Not more than five labels shall be selected from any one issue unit. Characteristics of the component paper stock tested for conformance to the requirements in Section 1 do not have to be retested under end item testing. A certified test report is evidence that the paper has passed the required test.
5. PREPARATION FOR DELIVERY:
Packaging, packing and marking shall be as specified in the contract or purchase order.
6. REFERENCED DOCUMENTS:
The issue of each document in effect on the date of the solicitation shall be used to determine compliance with these requirements.
TAPPI test methods are available from:
Technical Association of the Pulp and Paper Industry
Technology Park/Atlanta, P.O Box 105113
Atlanta, GA 30348
(404) 446-1400
ASTM methods are available from:
American Society for Testing and Materials
ATTN: Consumer Service
1916 Race Street
Philadelphia, PA 19103
(215) 299-5585
MIL-STD-105 is available from:
STANDARDIZATION DOCUMENTS ORDER DESK
Building 4D
700 Robbins Avenue
Philadelphia, PA 19111-5094
Copies of Executive Order 12873, dated October 20, 1993 may be obtained from:
The White House Publications Office
New Executive Office Building
White House
Att: Publications
Washington, DC. 20500
(202) 395-7332
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business