A-A-2951
The paper core shall be no less than 100% postconsumer
recovered materials in accordance with Title 40 CFR, Part 250. The Government
reserves the right to require proof of such conformance prior to first delivery
and thereafter as may be otherwise provided for under the provisions of the
contract.
4.2 Recycled Content Labeling. The recycled content shall be marked on the
product or unit pack.
5. QUALITY ASSURANCE PROVISIONS
5.1 Contractor Certification. The contractor shall certify and maintain
substantiating evidence that all items being offered for acceptance meet the
requirements of this Commercial Item Description and conform to the
manufacturer’s drawings, specifications, standards, and quality assurance
practices. The Government reserves the right to require proof of such
conformance prior to first delivery and thereafter as provided for under the
provisions of the contract.
5.2 Suppliers are encouraged to use quality control (QC) techniques that
exhibit control over their processes (e.g. (Statistical Process Control) SPC
Techniques) as defined in American National Standards Institute (ANSI) Z1.1,
Z1.2 and Z1.3 / American Society for Quality Control (ASQC) B.1, B.2 and B.3
that systematically reduce excess variations. If used, objective evidence shall
be available that demonstrates overall measurement adequacy techniques and
controls. These techniques shall ensure quality levels equal to, or greater
than, those cited in applicable technical document or, herein.
5.2.1 End item inspection/testing may be used by the offeror or the Government
representative, as a means to determine the effectiveness of the in process
quality controls. In process controls shall not be substituted for end item
performance testing.
5.2.2 For those characteristics for which there are no such controls, or for
end item performance test, lot by lot sampling for inspection/test shall be required.
Sampling shall be in accordance with the American National Standards Institute
(ANSI)/American Society for Quality Control (ASQC) Z1.4, Sampling Procedure and
Tables for Inspection by Attributes (Application for copies can be obtained
from American Society for Quality Control, P.O. Box 3005, 611 E. Wisconsin
Avenue, Milwaukee, WI 53201-4606.
5.2.3 An inspection lot shall consist of all like items submitted for
inspection at one time. The inspection level shall be S-3 with an AQL of 3%
defective. The supplier must provide objective evidence (tests and inspection
records) that the presented material meets the requirements of the sampling
plan as indicated above.
6. PACKAGING, PACKING, AND MARKING. Packaging, packing, and marking shall be as
specified in the contract or order.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business